The Review Desk
F.P. Journe élégante rep, FP factory V2: hands-on review
By swissreptime · hands-on, November 2026
We stock this watch. We handled this exact piece; every photo is ours.
The brass Bombay Watch Company tag in our photos is there to show they’re ours, taken on this piece.
This is for someone who wants the élégante 48’s look: a slim, screwed tonneau case, a white dial with big black numerals, and a loud orange strap. It looks the part, but here’s the one thing to know. The gen’s party trick is its sleep mode: leave it still for 35 minutes and the hands stop, then pick it up and they swing back to the right time. On ours, it doesn’t work. Rahul’s finding, in his words: “sleep function doesn’t work.” So buy it for the look, not for the clever bit.
What it is
- Reference copied: the F.P. Journe élégante 48, ref. ELHT, in titanium with F.P. Journe’s Titalyt treatment, with a white dial and black Arabic numerals on an orange rubber strap. F.P. Journe gives the 48 as 48 x 40 mm and 7.95 mm thick, water-resistant to 30 m with a screw-down crown and a sapphire caseback. (The smaller élégante is 40 x 35 mm and 7.35 mm thick, and it has no exposed screws on the bezel. Ours has four, IMG_2628.)
- The gen’s movement: calibre 1210, which F.P. Journe calls electromechanical: a quartz-regulated movement (32,768 Hz) with a patented two-rotor motor and its own low-power processor. F.P. Journe lists 18 jewels, 132 parts without the dial and 3.13 mm of height, with a gold-coloured movement and Côtes de Genève finishing.
- The gen’s sleep mode: a small mechanical motion detector, visible on the dial at about 4:30, tells the watch whether it’s being worn. After 35 minutes without motion, the hands stop to save battery, while the processor keeps counting time. When you put it back on, it wakes up and the hands take the shortest path, forwards or backwards, to the correct time. F.P. Journe gives 8 to 10 years of battery in daily use, and up to 18 years in standby.
- Factory: FP (V2). Bombay Watch Company has confirmed the factory and version for this piece. “FP” here is the factory’s label, not F.P. Journe’s initials.
- Movement in ours: the plate behind the sapphire back is engraved “F.P.JOURNE Invenit et Fecit élégante Calibre 1210 Geneva Made - 18 Jewels”, and a black bridge beside it reads “EXCLUSIVE AND PATENTED SYSTEM” (IMG_2631, IMG_2635, IMG_2636). It is not a Journe calibre 1210, and that print is decoration. We haven’t opened the case, and we won’t guess the base movement.


Scorecard
Every score points to a photo or to Rahul’s own test. If neither covers a category, it’s marked “not assessed”. Other owners’ reports don’t move these scores.
| Category | Score | Evidence |
|---|---|---|
| Dial | 8/10 | IMG_2633: under a macro, “F.P.JOURNE Invenit et Fecit”, the black Arabic numerals and the railway minute track with its 5-minute figures are crisp and even. The small seconds has fine rings and its own track. IMG_2628, IMG_2630: blue hands, the white centre framed by grey corner pieces held by small screws, as F.P. Journe describes the outer dial. We held back two points. The aperture at about 4:30 cuts into the 4 (IMG_2634), and we haven’t checked that against a gen. The small seconds sits at 6, where F.P. Journe lists it (IMG_2628, IMG_2633). We had no gen to hold beside it |
| Bezel | 7/10 | IMG_2628, IMG_2629, IMG_2630: four exposed screws sit evenly in the corners of the tonneau bezel, and the edge where the bezel meets the crystal is clean. We can’t judge the screw heads at our photo size, and we had no gen to compare, so we kept this modest |
| Case & finishing | 7/10 | IMG_2631, IMG_2636: the engravings on the caseback rim round the sapphire (ELEGANTE, F.P.JOURNE, Invenit et Fecit and a serial) are sharp and deep. IMG_2639: 8.3 mm on the caliper, against F.P. Journe’s published 7.95 mm, so about 0.35 mm thicker on one reading. IMG_2636 also shows a small white mark beside a caseback screw; at our photo size we can’t tell a scratch from a glove fibre. The case reads matte black in our photos, where one dealer describes the gen’s Titalyt as anthracite-grey (see below) |
| Strap / clasp | 6/10 | IMG_2628, IMG_2631: an orange rubber strap with an embossed pattern on its underside. IMG_2637: the buckle’s “F.P.JOURNE Invenit et Fecit” engraving is crisp, though the buckle is still part-filmed. IMG_2632, IMG_2639: the folding buckle reads polished and silver-toned, where one auction listing gives the gen clasp as Titalyt, matching the case. We haven’t worn it closed for any length of time |
| Movement & timekeeping | not scored: sleep mode fails | Rahul’s own test: “sleep function doesn’t work”. The sleep mode is the gen’s signature feature, and on ours it doesn’t work. We have no accuracy reading and no battery information, and the base movement is unknown. IMG_2631, IMG_2635: the “Calibre 1210” print is decoration |
| Lume | not assessed | No dark shot. The gen’s whole white centre is Super-LumiNova, so this one is worth checking |
| Wearability | not assessed | No on-wrist photo. For the record: 74.4 g on our scale with the strap and buckle (IMG_2632), and 8.3 mm thick (IMG_2639) |


Against the gen: what to look at
- The sleep mode: the one that matters. On the gen, 35 minutes without motion stops the hands, and movement brings them straight back to the correct time. On ours, in Rahul’s words, the “sleep function doesn’t work”. That also means the gen’s battery figures (8 to 10 years in daily use, 18 in standby) tell you nothing about this watch. We don’t know its battery life.
- The aperture at 4:30. On the gen, this window shows the motion detector, a tiny oscillating weight. On ours it shows a gilt toothed wheel with a jewel at its centre, under a black arm (IMG_2634, IMG_2629). We didn’t record whether it moves when you tilt the watch. With the sleep mode not working, we can’t say it’s connected to anything.
- The movement plate copies the gen’s text. “Calibre 1210”, “18 Jewels” and “EXCLUSIVE AND PATENTED SYSTEM” are printed under the sapphire back (IMG_2631, IMG_2635, IMG_2636). The gen’s 1210 has 18 jewels and a patented two-rotor motor. Ours is a different movement whose base we don’t know. You can see two copper coils at the bottom of the back (IMG_2631), but we won’t read anything into them.
- Thickness: close, not the same. Our caliper reads 8.3 mm (IMG_2639). F.P. Journe publishes 7.95 mm. That’s one reading from one photo, about a third of a millimetre over.
- Case colour and clasp. We found no colour description from F.P. Journe itself. One dealer article calls the Titalyt finish “deep, anthracite-grey”, and one auction listing gives the gen’s clasp as Titalyt. Ours reads matte black in every shot (IMG_2628, IMG_2631), with a polished silver-toned buckle (IMG_2632, IMG_2639). Light changes colour a lot, and we had no gen beside it.
- Weight: nothing to compare against. Ours is 74.4 g on the strap and buckle (IMG_2632). We found no published weight for the gen.




Known issues / QC to check on any example
- Test the sleep mode yourself. Set the watch down somewhere still for well over 35 minutes and note the time. Do the hands stop? Then pick it up and move it. Do the hands jump to the correct time? On ours, the sleep function doesn’t work. We’ve tested one piece, so check every example.
- Watch the aperture wheel. Tilt the watch and see whether the wheel at 4:30 moves (IMG_2634). On the gen, that’s the motion detector.
- The 4. On ours the aperture cuts into the 4 (IMG_2634). Compare it with gen photos before you decide.
- Case finish. Check the case, the caseback rim and the black finish on any example under good light.
- Buckle film. The buckle on ours was still part-filmed (IMG_2637). Take the film off and check the polish and the engraving.
- Crown and water. The gen has a screw-down crown and is rated to 30 m. We didn’t check whether ours screws down, and we haven’t tested the water resistance. Keep it dry.
- Lume. The gen’s white centre is fully luminous. We have no dark shot, so check yours in the dark.


What other owners report
None of this comes from our photos, and none of it changes our scores.
- We found no owner reports on FP’s élégante, V1 or V2. We searched forum excerpts, Reddit threads that show up in search results, other rep forums and Chinese sources. Every hit for “FP élégante” was about F.P. Journe the brand, not the factory. So we don’t know what V2 changed from V1.
- One long RWI thread on an élégante rep. RWI’s “IT’S HAPPENING” thread on an F.P. Journe élégante rep runs past 20 pages. We could only read search excerpts, not the thread, and nothing we saw names the factory, so we can’t say it’s about FP’s V2.
- Others report the same sleep problem. In those excerpts, one member says the sleeping-hands function doesn’t work on theirs, and an earlier RWI thread concluded the motion sensor doesn’t work and there is no sleep mode. We can’t tie either to FP’s V2, but it suggests ours isn’t a one-off. If you own one, test it and tell us.
- Nobody has confirmed the base movement. One RWI poster suggests a Ronda quartz base. We found no teardown, so we can’t confirm it.
- On the gen, sources differ on the sleep timing. F.P. Journe says 35 minutes. SJX’s 2016 hands-on says 30, and Horbiter says 30 to 35. We use F.P. Journe’s figure.
Who should skip it
- Anyone buying it for the sleep mode. On ours, it doesn’t work.
- Anyone who needs to know the movement. The plate says Calibre 1210, the base is unknown, and nobody we found has opened one.
- Anyone who wants the case and clasp to match the gen’s Titalyt. Ours reads black with a silver-toned buckle, and one auction listing gives the gen’s clasp as Titalyt.
- Anyone who wants a watch for swimming. We haven’t tested the water resistance.
FAQ
Does the sleep mode work?
Not on ours. Rahul’s finding: “sleep function doesn’t work”. On the gen, the hands stop after 35 minutes without motion and reset to the right time when you pick it up. We’ve tested one piece. In RWI search excerpts, an owner of an élégante rep (factory not named) reports the same.
Is it the 40 mm or the 48 mm?
It copies the 48 (48 x 40 mm, 7.95 mm thick on the gen). It has the exposed bezel screws the 40 doesn’t have, and our caliper reads 8.3 mm thick (IMG_2639). We didn’t measure the length or width.
What movement is inside? The back says Calibre 1210.
The plate is printed “Calibre 1210” and “18 Jewels” (IMG_2635), copying the gen. It isn’t a Journe 1210. We haven’t opened it, and nobody has confirmed the base. One forum poster suggests a Ronda quartz.
Is the gen a quartz watch?
Sort of. F.P. Journe calls the 1210 electromechanical: a quartz frequency (32,768 Hz) drives a patented two-rotor motor, with a processor that runs the sleep mode. It runs on a battery that F.P. Journe rates at 8 to 10 years of daily use.
How heavy is it?
74.4 g on our scale (IMG_2632), on the orange rubber strap with the buckle. We found no published weight for the gen.
What changed in V2?
We don’t know. We found no source that says what FP changed from V1 to V2.
November 2026
Read next: