swissreptime.The reference desk

Buyer’s Edge

Is it really from VSF? How to read the serial, the clasp code and the batch on a rep

Diagram of a watch head with the rehaut at 6 o’clock marked as the serial position, and an open clasp with the inner blade marked as the clasp code position.
The verdict

The serial and the clasp code on a rep tell you the batch. They don’t tell you the factory. A code that matches a known VSF batch means the watch could be VSF. It doesn’t mean it is. The codes sit on bought-in parts, nothing stops anyone engraving them, and there is at least one report of the same codes on a watch VSF didn’t make. Use the code to rule a watch out and to date it. To rule a watch in, you need the code, the movement, the known tells for that model, and a seller’s QC photos all agreeing with each other.

That’s a less exciting answer than a lookup table. It’s the true one, and the rest of this page shows you how to do each part.

First, what do these numbers mean on a genuine Rolex?

You need this to understand what the rep factories are copying.

On a modern genuine Rolex the serial number is engraved on the rehaut, the polished inner ring between the dial and the crystal, at 6 o’clock. Older watches carry it on the case between the lugs at 6 o’clock instead. Since about 2010 the serial is eight random letters and numbers, and every watch has its own.

The clasp code is a small stamp on the inside of the clasp blade. On older bracelets it was a letter or two for the year and a number for the month. Since about 2011 it is a random three-character code that can’t be dated.

So on a genuine watch: one serial, one watch.

What do they mean on a rep?

Two serials side by side. The genuine one is labelled eight random characters, unique to one watch. The rep one has its first characters highlighted and labelled batch prefix, shared by the whole production run.

A rep factory doesn’t keep a register of unique serials. It orders rehauts and clasps in runs, and a run carries the same engraving, or the same opening characters. On RWI, members have pointed out that RICH Submariners share the same first two and last two characters of the serial. A 2025 r/RepTime guide by u/Jeka_n3xt lists rep serials and clasp codes by model and factory. A list like that is only possible because the codes repeat.

So part of the serial repeats. That repeating part is what people call the batch code. When someone says “a 6X VSF”, they mean a VSF whose rehaut serial starts with 6X.

Which makes the batch code the only date stamp a buyer can read. Factories change things quietly, a crystal here, a gasket there, and never announce it. The batch prefix is how the community tracks which watches came before a change and which came after.

Where do I look?

Three places, and you can check all of them without opening the watch.

  1. The rehaut at 6 o’clock. Tilt the watch under a light and read the serial through the crystal. A loupe or your phone’s macro mode helps. Note the first few characters and the last few. On some models the part that repeats sits at the end.
  2. Inside the clasp. Open the clasp and look at the inner blade for a three-character stamp. That’s the clasp code.
  3. Stickers and packaging. Some factories mark their output with their own stickers. Treat these as the weakest evidence of the three. A sticker peels off one watch and goes on another.

Don’t open the caseback to hunt for a movement serial. You’ll put the water resistance at risk, and there’s no published table to check that number against anyway.

What are the VSF batch codes?

Table of VSF batch prefixes reported in 2026, 6W0, 6X and Q66, with what owners have reported about each.

These are the prefixes that came up in 2026 forum discussion, with what owners said about each. These are owner reports, not factory statements.

PrefixSeen onWhat owners reported
6W0GMTReported as a bad batch: milky gaskets, alignment
6XSub, GMTReported better than 6W0. Better crystal and rehaut on the Sub
Q66Sub 124060One owner found its serial engraving whiter and closer to genuine than a 6X

Two things follow from that table.

A newer batch isn’t always a better one. Each run fixes some things and can slip on others. One RWI reviewer called buying a VSF in 2026 “basically a lottery”.

And you’ll see claims that certain prefixes mean a certain grade of steel. As of this writing that rests on one tester’s results, and we have not seen a second tester confirm them. We don’t treat it as known.

Which serials and clasp codes are listed for VSF?

The fullest public list is the r/RepTime serial number and clasp code guide by u/Jeka_n3xt. The table below is the VSF part of it for the models people ask about most. A star stands for a character that changes from watch to watch. One watch carries one serial and one clasp code from its row, not all of them.

ModelSerials listed for VSFClasp codes listed for VSF
Submariner 41, 126610LN and LV6XO*****, 5RO9****, 5X1O****, 5XO8****, 2R8S****, Q66T****, 2R9*X***E7Y, F80, 3VV, 1LQ
Submariner 41, 1240606XO*****, 5X12****, 5W11****, 5X1O****, 5XO9****, 5XO8****, 5RO9****, 5RO8****, Q66T****E7Y, F80, 3VV, 7GJ
GMT-Master II, 116710LN and the 126710 family6XO*G***, 5X1O****, ****Y2L31NQ, A9A, F6U
Datejust 41, 1263346XO*A***, 6WO*A***, 5X1*A***, 5XO9****, 5XO8****, 5R06W*** (V2), Z66E****B1R, ORV, K6G, K5G
Datejust 36, 1262346XO*****, 5X12****, R86Z****F6U, P2K, 1RD, K6G, 705
Oyster Perpetual 41, 1243006X0*Y***, Z10Y****989
Daytona 1265006XO*L***, 6W01Y***, 5X11****, 5W12****, 5X1O****, Q66T****, 0XJ2****, ****LV66, H88F****7CD, 3XU, W5Y, RP9, M5X

A few things to know before you use it.

The codes are copied as the guide prints them, and it mixes the letter O with the digit zero. It prints both 6XO and 6X0. When you compare against your watch, treat the two as the same character.

Most VSF serials on the list start with 5 or 6: 5R, 5W, 5X, 6W, 6X. Not all do. Q66T is listed on the Submariner and the Daytona.

Sometimes the repeating part is at the end. The GMT row has a serial that ends Y2L3, and the Daytona row has one that ends LV66.

Our own reading of the list, and nobody has confirmed it: inside the 6X batch the fifth character seems to follow the model. It’s G on the GMT, L on the Daytona, A on the Datejust 41 and Y on the Oyster Perpetual 41.

The guide dates from 2025, so the newest runs won’t be on it. Its author says the same thing we do. A serial from the table is one factor and is not enough on its own to call a watch anything.

What about ARF?

ARF is harder, for two reasons.

The first is the name. In August 2026 an RWI first-look post reported that ARF had rebranded as ONE Factory, with “ONE” stickers on the clasp and lugs and a new caseback sticker. A reviewer in the same thread called it the owner’s second name change. We have not been able to confirm it outside that thread. Chinese listings were still using the ARF name in October, and a different successor name is circulating in the Chinese trade. Until that settles, read “ONE” or “ARF” on a listing as the seller’s label and nothing more.

The second is that very little is listed for it. The r/RepTime guide has two ARF rows. The Datejust 36 116234 is listed with a serial that starts 55 and ends D1 (55****D1) and clasp code C0C. The GMT-Master II is listed with a serial that ends L6V6 and clasp code F6U. None of ARF’s current 41mm Submariners are on it. So for ARF you lean on the model tells as well:

None of these is proof on its own. Together with a seller’s QC photos, they narrow it down.

And the others?

The same r/RepTime guide lists a few codes for four other factories.

FactoryModelSerials listedClasp codes listed
GMFDatejust 36, 12623449GC****7QE
GMFAir-King 1269007MC5****N9N
GMFExplorer II 226570****X2734AZ, N9N
QFDaytona 126529VS96****N9C, T1G
QFDaytona 126506VS96****VSP
BTFDaytona 116500V4****P5, V5****P5W5Y
BTFDaytona 116503V3****P5W5Y
BTFDaytona 116506****J558W5Y
TW+Yacht-Master 42, 226627FB1A****Y8C

Clasp code W5Y is on every BTF Daytona row. It is also one of the clasp codes listed for the VSF Daytona. That’s one more code two factories share.

Beyond that list, two things from the forums:

That last one is the whole problem in miniature.

Why can’t a code prove the factory?

Three reasons.

The parts are bought in. Rehauts, clasps and bracelets come from suppliers. Two factories that buy from the same supplier can ship the same code. The r/RepTime guide shows it. On the GMT-Master II, clasp code F6U is listed under both ARF and VSF. On the Sea-Dweller 126600, the same serial prefix, 2K6J, is listed under VSF and under one other factory.

The codes are public. Once a code is known as “the VSF code”, anyone making cheaper watches has a reason to engrave it. In August 2026 a comparison of a VSF Pepsi GMT against a copy of one was posted on RWI. The copy was described as carrying the same clasp and rehaut codes as the VSF. The tells listed included a flat edge on the bezel rim that the copy lacked. That comparison came from someone who appears to be a dealer, so weigh it accordingly. We have not seen it confirmed by anyone else.

The name on the listing is free. A seller types “VSF” into a title. Nothing checks it.

So how do I actually check?

Five-step checklist: read the batch prefix, check the movement fits the factory and reference, compare model tells, match the QC photos to the watch in hand, and weigh who is selling it.

Work through these in order. Each one can fail the watch. No single one passes it.

  1. Read the batch prefix. Is it a prefix that’s been reported for that factory and that model this year? If it’s a prefix nobody has reported from that factory, ask the seller which batch it is and look for other owners with the same one before you go further. It could be a new run. It could also be someone else’s watch.
  2. Check the movement fits. A VSF Submariner 126610 should have a VS3235, which is the Dandong 3235 supplied to VSF. If the seller’s own QC photo or listing shows something else, it isn’t what the title says. Keep in mind the same base movement goes into other factories’ watches, so the right movement is necessary and not enough.
  3. Compare the model tells. Every factory’s version of a reference has known habits: the crystal, the rehaut engraving, the bezel edge, the date font. Find a recent review of that exact reference from that factory and compare point by point.
  4. Match the QC photos to the watch. Before shipping, a seller should send QC photos of your watch. When it arrives, the serial, the clasp code and any small marks should match those photos. If they don’t, you received a different watch.
  5. Weigh the seller. A seller who names the batch, sends QC photos without being asked, and tells you plainly when a factory’s current batch has a problem is giving you the only real proof of origin there is: a short, checkable chain from factory to you.

What we don’t know

One last thing. These codes are also one of the things a watchmaker or an authenticator checks: a serial they’ve seen before is a serial that isn’t unique. Reading the code is for knowing what you bought. It was never going to make the watch something else.


Read next:

All reviews and guides · questions? talk to us